Get to know IDEM Diesel Engines Licensee of Mercedes Benz

We guide you...

OM 457 Euro2 Engine

Introducing OM 457 Euro2 Engine

Cylinder block
The cylinder block is completely made of cast iron with complete cylinder and bushing. The oil filter, pump unit, fuel filter and oil level measurement are located on the right side of the engine (flywheel front side), and the starter, manifold are located on the left side. A belt in the shape of 9 connects of the water pump and the fan on it. Also, the engine has an oil pan made of cast aluminum.
Cylinder head
The cylinder head is made of cast iron and is separate for each cylinder. The intake manifold and the cylinder head cover are all made of lightweight cast materials.
Crankshaft
The crankshaft is made of one-piece alloy steel by forging method and with very precise machining. The crankshaft of this engine is held in 7 points by three-layer bearings, with steel backs (with a polished bearing in the middle). Also, the crankshaft is balanced by special weights.
Connecting rod
The connecting rods like the crankshaft, are made of one piece by forging and with very precise machining and can be separated. The connecting rod is maintained by a three-layer bearing, with steel backs, and has separate bronze bushings for connecting to the piston.
Camshaft
The camshaft is made of a single piece by forging and with very precise machining and is maintained by 5 bearings. The camshaft provides its movement through the gear engaged with the crankshaft.
Piston
The pistons are made of cast aluminum and consist of 3 compression and oil control rings, and the piston and connecting rod in this engine can be removed from the top.
Valve
The valves are put to work by a combination of bracket, push rod, and rocking arms. Cast iron guide bushings and heat-resistant valve seat rings guarantee a long service life and maintenance period.
Fuel injection system
To use the fuel correctly, the direct injection method is used. The injection system includes a pump unit, fuel pump, fuel filter, multi-hole injector and an injection timing system.
Lubrication under pressure
Lubrication operation by means of a gear type oil pump that passes all the oil through the filter and feeds the crankshaft, camshaft, connecting rod, bearings and rocking arms. In this way, the injector pump, governor and air pump are connected to the engine lubrication system. In this system, safety valves are responsible for reducing excess pressure.
Cooling system

By using a centrifugal pump, depending on the application of the engine, air-to-water or water-to-water radiators can be used. The water temperature can be controlled using a thermostat.

Application
This engine can be used as a reliable and reliable power source in industrial and commercial equipment, construction, agriculture, commercial vans, as well as a power generator source for all types of sea boats. According to the customer's request, this engine can be used for different purposes by being equipped with special tools.

Technical Specifications of OM 457 Euro2 Engine

Charts of Behavior OM 457 Euro2 Engine
Daimler Benz OM 457 Euro 2 Engine Treatment
Specifications Table of OM 457 Euro2 Engine
نوع سیلندر Inline/Vertical Cylinders type
تعداد سیلندر 6 Cylinders
قطر سیلندر (میلیمتر) 128 mm Cylinder bore
کورس پیستون 155 mm Stroke
حجم موتور (لیتر) 12 Lit Total piston displacement
نسبت تراکم 17.25:1 Compression ratio
حداکثر قدرت خروجی (کیلووات) 220~260 Kw @ 2000 rpm Max output (Kw)
حداکثر گشتاور(نیتوتن/متر) 1250/1600 N.m @ 1100 rpm Max torque (N-m)
وزن موتور خشک(کیلوگرم) 900 Kg Engine dry weight (kg)
کنترل موتور Electrical Engine control
موقعیت نازل Vertical Nozzle position
سرعت متوسط پیستون 10 ms @ 2000 rpm Mean piston speed
فشار متوسط موثر 9.16 bar @ 2800 rpm Mean effective pressure
جهت چرخش(خلاف عقربه هاب ساعت) c.c.w Rotation
ظرفیت سیال خنک کننده 15 Lit Cooling water capacity
حداکثر ظرفیت روغن کارتر 27.5 Lit Max lubrication oil capacity
حداقل مصرف سوخت 195 gr/kw.h @ 1400 rpm Min. fuel consumption
سوپاپ دود 2 Exhaust valves
سوپاپ هوا 2 Intake valves
استاندارد آلایندگی با گوگرد کمتر از 0.05 Euro II Emission standard
سیستم ترمز موتور Decompression Valve Engine break system
Dimensions of OM 457 Euro2 Engine
Daimler Benz OM 457 Euro 2 Dimenssion

Address

 Factory: 4th Sanaat St., West Industrial Road,    Diesel Abad Road, Tabriz,East Azarbyjan , IRAN

+98 41 34450011

Head Office: No.5, 23rd alley, South Ghandi Ave., Vanak Square, Tehran, IRAN

+98 21 88770116

[email protected]

513354688

+98 41 34451885

Sat. – Thu. From 7:00 to 18:00

Links

About us

Our success

On Road Engines

Off Road Engines

Spare parts

Services

Sales & Export

 

Please publish modules in offcanvas position.