Get to know IDEM Diesel Engines Licensee of Mercedes Benz

We guide you...

OM 364 Euro3 Engine

Introducing OM 364 Euro3 Engine

Cylinder block

Cylinder block is completely cast iron with complete cylinder (without bushing). The oil filter, injector pump, fuel filter and oil gauge are located on the right side of the engine (flywheel front side), and the starter, manifold are located on the left side. A V-shaped belt connects the water pump and the fan to the engine. Also, the engine has an oil pan made of steel sheet or light cast material.

Cylinder head
It is made of cast iron and is common to all cylinders. The intake manifold and the cylinder head cover are all made of lightweight cast materials.
The crankshaft of this engine is made of one piece by forging method and with very precise machining. The crankshaft is supported at 5 points by three-layer bearings, with steel backs (with a polished bearing in the middle). Also, the crankshaft is balanced by special weights.
Connecting rod
Like the crankshaft, the connecting rod is made from a single piece by forging and with very precise machining and can be separated. The connecting rod is maintained by a three-layer bearing, with steel backs, and has separate bronze bushings for connecting to the piston.
The camshaft of this engine is made of one piece by forging method and with very precise machining and is maintained by 3 bearings. The camshaft provides its movement through the gear engaged with the crankshaft.
The pistons in this engine have three compression rings and two oil control rings, and the piston and connecting rod can be removed from the top.
The valves are put to work by a combination of bracket, push rod, and rocking arms. Cast iron guide bushings and heat-resistant valve seat rings guarantee a long service life and maintenance period.
Fuel injection system
To use the fuel correctly, the direct injection method is used. The injection system includes a linear pump, fuel pump, fuel filter, multi-hole injector and an automatic injection timer.
Lubrication under pressure
Lubrication operation by means of a gear type oil pump that passes all the oil through the filter and feeds the crankshaft, camshaft, connecting rod, bearings and rocking arms. In this way, the injector pump, governor and air pump are connected to the engine lubrication system. In this system, safety valves are responsible for reducing excess pressure.
Cooling system
By using a centrifugal pump, depending on the application of the engine, air-to-water or water-to-water radiators can be used. The water temperature can be controlled using a thermostat.
This engine can be used as a reliable and reliable power source in industrial and commercial equipment, construction, agriculture, commercial vans, as well as a power generator source for all types of sea boats. According to the customer's request, this engine can be used for different purposes by being equipped with special tools.
Technical Specifications of OM 364 Euro3 Engine
Charts of Behavior OM 364 Euro3 Engine
Daimler Benz OM 364 Euro 3 Engine Treatment
Specifications Table of OM 364 Euro3 Engine
نوع سیلندر Inline/Vertical Cylinders type
تعداد سیلندر 4 Cylinders
قطر سیلندر (میلیمتر) 97.5 mm Cylinder Bore
کورس پیستون 133 mm Stroke
حجم موتور (لیتر) 3.972 Lit Total piston displacement
نسبت تراکم 18:1 Compression Ratio
حداکثر قدرت خروجی (کیلووات) 95 Kw @ 2600 rpm Max output (Kw)
حداکثر گشتاور(نیتوتن/متر) 455 N.m @ 1200~1400 rpm Max Torque (N-m)
وزن موتور خشک(کیلوگرم) 355 Kg Engine Dry Weight (kg)
کنترل موتور Mechanical Engine control
موقعیت نازل Vertical Nozzle position
سرعت متوسط پیستون 11.5 ms @ 2600 rpm Mean piston speed
فشار متوسط موثر 14.39 bar @ 1400 rpm Mean effective pressure
جهت چرخش(خلاف عقربه هاب ساعت) c.c.w Rotation
ظرفیت سیال خنک کننده 7 Lit Cooling water capacity
حداکثر ظرفیت روغن کارتر 10.5 Lit Max Lubrication oil capacity
حداقل مصرف سوخت 208 gr/kw.h @ 1900 rpm Min. fuel consumption
سوپاپ دود 1 Exhaust Valves
سوپاپ هوا 1 Intake valves
استاندارد آلایندگی با گوگرد کمتر از 0.05 Euro III Emission Standard
سیستم ترمز موتور No Engine break system
Dimensions of OM 364 Euro3 Engine
Daimler Benz OM 364 Euro 3 Dimenssion


 Factory: 4th Sanaat St., West Industrial Road,    Diesel Abad Road, Tabriz,East Azarbyjan , IRAN

+98 41 34450011

Head Office: No.5, 23rd alley, South Ghandi Ave., Vanak Square, Tehran, IRAN

+98 21 88770116

[email protected]


+98 41 34451885

Sat. – Thu. From 7:00 to 18:00


About us

Our success

On Road Engines

Off Road Engines

Spare parts


Sales & Export


Please publish modules in offcanvas position.